MS5168-M05
Introduction
The MS5168-Myy family is a range of ultra-low power, high performance surface mount modules targeted at IEEE 802.15.4, JenNet-IP, ZigBee Light Link, ZigBee Smart Energy and RF4CE networking applications, enabling users to realize products with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules use NXP’s MS5168 wireless microcontroller to provide a comprehensive solution with large memory, high CPU and radio performance and all RF components included. All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development.
Variants
Table 1 Meshreen module variants
*1 FCC Certification Limitation:The high power module variants are classified as ‘mobile’ devices pursuant
with FCC § 2.1091 and must not be used at a distance of < 20 cm (8”) from any people. This applies to the
MS5168-M04 and MS5168-M05 module type (2AC2E-68M04).
*2 CE Certification Limitation: MS5168-M14 and MS5168-M05 CE tested under condition Power Level 2.
Specification
There are differences between modules, the parameters are defined here.
VDD=3.3V @ +25°C
Table 2 Module specification
Meshreen & NXP model compatible table
Meshreen’s modules are pin to pin compatible with NXP modules.
Documentation
Pin configurations
Note that the same basic pin configuration applies for all module designs.
However, DIO3(pin9) and DIO2(pin8) are not available on the high power modules.
Outline Drawing
Thickness: 2.8mm
Four corner of PCB are PCB V-Cut tolerance
Label example
Packing
For All models are packing in one size Tray, the Tray dimension is below.
The standard packing is base on 500 pcs, use 11 trays which include cover.
All modules will packing in vacuum packing bag which include trays, humidity indicator card, desiccant.